FAQ’s

“Does your bed Camera connect directly to the factory Harness? I don’t want to have to cut up my cables.”

Yes, this is a direct replacement using the same harness your factory camera plugs into. the connection plug is just rotated 90 degrees.

“I have a plug in the Bed for my 5th Wheel that I use for Yaw and TPMS can I still use the ANYWHERE Cam?”

Yes, you will utilize the same channel the plug in the bed for the camera will use. So you cannot use the Ford Aux Camera.

“I have the 12 Pin Pro Trailer Plug on my Bumper Plug. Can I still use the Aux Camera in my bed?”

Yes, if you do not plan on using the pro Trailer plug you can disconnect it from the truck from behind the bumper. However if you plan to use it or Trailer TPMS/Yaw Sensors you will need the Y-Connector Sold separately in our Accessories Page.

I have the Ford Trailer Camera on my Trailer, can I use your camera in the bed also?

No, our camera utilizes the same channel the Ford Camera would use. Powering both Cameras at the same time would result in scrambled video feed.

“For my Trailer, do I have to make my own connector?”

No, you can utilize the extension cables as disconnect points for your trailer.

“If I purchase your camera would I be able to plug it into the factory harness?”

Yes, our cameras are direct plug and play, no wiring necessary.

“Where do you disconnect the ANYWHERE camera for a trailer?”

We recommend an additional 3’ extension cable (under accessories) to have a disconnect near your trailer plug connection.

“There’s a button for a trailer camera, when I push it it’s a Blue screen. That’s the channel correct"?”

Yes, that is the correct channel.

What is your Return Policy?

We use a 30/90/360 Day System from Date of Purchase.

30 Days from D.O.P. - Return for Refund expires

90 Days - Free Exchange period ends, You will have to pay shipping.

360 Days - Warranty or Exchanges Expire