CSPNW ANYWHERE Auxiliary Camera Kit for 2017-2025 Ford F250 F350 F450 F550 Superduty and Some F150's
Auxiliary Camera Kit for Ford F-Series Trucks
Compatibility: Fits 2017+ Ford Super Duty and select F150 models. Installation takes just 15-20 minutes. If you have an AUX Camera Button on your screen, this kit is for you!
Versatile Mounting: This camera can be mounted almost anywhere and is designed to plug directly into your Ford harness. Whether you need to see your gooseneck ball, monitor a camper, or keep an eye on your load, the possibilities are endless. It’s perfect for trucks with toolboxes, fuel tanks, or unique setups like flatbeds, salt trucks, boats, or campers.
Durable and Rust-Resistant: Constructed with anodized aluminum and plastic parts to prevent rust. The aluminum mount plate can be attached using the included 3M adhesive tape or hard-mounted with counter-sunk hardware at your preferred location.
Easy Removal: Designed with workers in mind, the camera can be easily removed when needed. Simply disconnect the plug, stow the cable, and unclip the camera from the mount plate. Reinstall it just as easily when you’re ready.
Customizable Mounting: The new reversible mount design allows you to configure the camera in either an upright or hanging position, giving you maximum flexibility in placement.
Important Notes Before Ordering:
• Compatibility: Requires Tow Technology Package or Ultimate Trailer Tow Camera System (874) and Sync 3/4.
• F150 Compatibility: Check for a populated 12-pin plug at the rear bumper. If harness is populated and you do have a blue screen when selecting the Aux Camera on the screen you need to replace the whole rear harness. Contact us for details.
• If using a 12-pin round connector at the rear bumper under the 7-Pin Trailer connector (Smart Trailer) you may need an additional Y-Cable, available in our store under accessories.
• Video Quality: MY23-25 Super Duty models may experience lower video quality than MY17-22 due to Ford Module bandwidth restrictions.
• Non-Inverted Camera Option: Not recommended for viewing rear traffic as vehicles will appear on the opposite side of the screen. Best for side views or inside cab views and facing forward.
Additional Accessories: Extension cables and more available in our store. For trailers, we recommend adding a 3’ extension cable for quick disconnects at the trailer plug area.
Need Help? Not sure if this kit is right for you? Send us an email with your intended use, and we’ll help you choose the right setup.
Installation Video: Check out our installation video below.
Auxiliary Camera Kit for Ford F-Series Trucks
Compatibility: Fits 2017+ Ford Super Duty and select F150 models. Installation takes just 15-20 minutes. If you have an AUX Camera Button on your screen, this kit is for you!
Versatile Mounting: This camera can be mounted almost anywhere and is designed to plug directly into your Ford harness. Whether you need to see your gooseneck ball, monitor a camper, or keep an eye on your load, the possibilities are endless. It’s perfect for trucks with toolboxes, fuel tanks, or unique setups like flatbeds, salt trucks, boats, or campers.
Durable and Rust-Resistant: Constructed with anodized aluminum and plastic parts to prevent rust. The aluminum mount plate can be attached using the included 3M adhesive tape or hard-mounted with counter-sunk hardware at your preferred location.
Easy Removal: Designed with workers in mind, the camera can be easily removed when needed. Simply disconnect the plug, stow the cable, and unclip the camera from the mount plate. Reinstall it just as easily when you’re ready.
Customizable Mounting: The new reversible mount design allows you to configure the camera in either an upright or hanging position, giving you maximum flexibility in placement.
Important Notes Before Ordering:
• Compatibility: Requires Tow Technology Package or Ultimate Trailer Tow Camera System (874) and Sync 3/4.
• F150 Compatibility: Check for a populated 12-pin plug at the rear bumper. If harness is populated and you do have a blue screen when selecting the Aux Camera on the screen you need to replace the whole rear harness. Contact us for details.
• If using a 12-pin round connector at the rear bumper under the 7-Pin Trailer connector (Smart Trailer) you may need an additional Y-Cable, available in our store under accessories.
• Video Quality: MY23-25 Super Duty models may experience lower video quality than MY17-22 due to Ford Module bandwidth restrictions.
• Non-Inverted Camera Option: Not recommended for viewing rear traffic as vehicles will appear on the opposite side of the screen. Best for side views or inside cab views and facing forward.
Additional Accessories: Extension cables and more available in our store. For trailers, we recommend adding a 3’ extension cable for quick disconnects at the trailer plug area.
Need Help? Not sure if this kit is right for you? Send us an email with your intended use, and we’ll help you choose the right setup.
Installation Video: Check out our installation video below.
Auxiliary Camera Kit for Ford F-Series Trucks
Compatibility: Fits 2017+ Ford Super Duty and select F150 models. Installation takes just 15-20 minutes. If you have an AUX Camera Button on your screen, this kit is for you!
Versatile Mounting: This camera can be mounted almost anywhere and is designed to plug directly into your Ford harness. Whether you need to see your gooseneck ball, monitor a camper, or keep an eye on your load, the possibilities are endless. It’s perfect for trucks with toolboxes, fuel tanks, or unique setups like flatbeds, salt trucks, boats, or campers.
Durable and Rust-Resistant: Constructed with anodized aluminum and plastic parts to prevent rust. The aluminum mount plate can be attached using the included 3M adhesive tape or hard-mounted with counter-sunk hardware at your preferred location.
Easy Removal: Designed with workers in mind, the camera can be easily removed when needed. Simply disconnect the plug, stow the cable, and unclip the camera from the mount plate. Reinstall it just as easily when you’re ready.
Customizable Mounting: The new reversible mount design allows you to configure the camera in either an upright or hanging position, giving you maximum flexibility in placement.
Important Notes Before Ordering:
• Compatibility: Requires Tow Technology Package or Ultimate Trailer Tow Camera System (874) and Sync 3/4.
• F150 Compatibility: Check for a populated 12-pin plug at the rear bumper. If harness is populated and you do have a blue screen when selecting the Aux Camera on the screen you need to replace the whole rear harness. Contact us for details.
• If using a 12-pin round connector at the rear bumper under the 7-Pin Trailer connector (Smart Trailer) you may need an additional Y-Cable, available in our store under accessories.
• Video Quality: MY23-25 Super Duty models may experience lower video quality than MY17-22 due to Ford Module bandwidth restrictions.
• Non-Inverted Camera Option: Not recommended for viewing rear traffic as vehicles will appear on the opposite side of the screen. Best for side views or inside cab views and facing forward.
Additional Accessories: Extension cables and more available in our store. For trailers, we recommend adding a 3’ extension cable for quick disconnects at the trailer plug area.
Need Help? Not sure if this kit is right for you? Send us an email with your intended use, and we’ll help you choose the right setup.
Installation Video: Check out our installation video below.
Included with purchase:
1 x CSPNW High Resolution Camera System
1 x Buckle Style Pivot Removable mounting system
1 x Black Anodized Aluminum Buckle Mounting Plate (ability for hardware install)
1 x 3M Adhesive Pad for Mounting Plate for quick install
1 x Ford Adapter Harness
1 x 10’ Cable (enough for Long bed and Short bed applications to mount camera in center behind a large toolbox)
1 x Thumb screw
1 x Nylon P Clamp for Cable Retention and Strain Relief
8 x Zip Ties
5 x Zip tie adhesive mounts
SPECIFICATIONS:
FOV: 150-H 120-V
LUX: 0.001
Input Voltage: 5-16V
Power Consumption: .1A @ 14V +/- 15%
Camera Dimensions: 1.8” H x 1.4” D x 1.2” W
Working Temperature: ~ 0F - 125F
